CUSTOMER SUCCESS
Proven Performance Worldwide
Long-term operational validation from mining sites across 6 continents.
FEATURED SUCCESS STORIES
Real Results from Real Mines
Working closely with global customers, we quantify operating data over time and continuously track product quality and user feedback.
A Major Copper Mine in Tibet
DN800/DN900 liquid-phase rubber bends and rubber-lined steel pipes
Stable in-service performance with significantly higher value than other rubber piping installed during the same period. Official mill report issued and stamped.
— Stamped certification from the client concentrator
A High-Altitude Polymetallic Mine in Xinjiang
ASL-DN350 liquid-phase rubber bend hose
After five months of continuous service, the inner pipe remained in good condition with no abnormal wear, meeting the site wear-life expectation.
— Stamped and signed by the client concentrator
A Major Gold Mine in Western Australia
DN50/DN150 liquid-phase rubber bend hoses
"Their quality is world class, and their wear life is outstanding." Validated through months of heavy-wear site testing.
— Signed by the client processing plant general manager
A Major Gold & Copper Mine in Fujian
Electric pinch valves and rubber expansion joints
Rubber expansion joints ran for over 15 months under strong pump-inlet vibration and backflow impact without any quality issues.
— Joint certification from the client copper concentrator
A Major Molybdenum Producer in Henan
DN350 liquid-phase rubber bend hose
After 110 days, teardown inspection showed no obvious internal wear on the RIO bend, while conventional lined bends under the same duty already showed edge wear.
— Stamped by the client sand-water workshop
A Major Magnetite Processing Plant in Australia
600NB/500NB high-wear-resistant rubber bends
Wear rate of 3.8~5.5 mm/Mt, aligned with world-class wear-performance benchmarks. Total processed ore reached 6.5 million tonnes.
— Signed by the client production general manager
A Major Molybdenum Processing Plant in Heilongjiang
Rubber slurry pump piping, steel-rubber composite pipes, and sand-settling tees
Wear rate was only 0.19~0.97 mm/Mt versus 3.0~16.0 mm/Mt for conventional domestic pipes, extending service life by 15~30x.
— Jointly stamped by client equipment and operations teams
A Major International Oil Sands Producer in Canada
UF1 SP-116 rubber-lined spool and valve core
Operated leak-free for about 1.2 years in extremely cold, high-erosion oil sands duty, meeting top-tier life expectations for this critical location.
— Certified by the client asset integrity engineer, P.Eng.
A Copper-Cobalt Mine in DR Congo
DN350/DN520 liquid-phase wear-resistant rubber piping package
Ran 4,178 hours under 5-6 daily start-stops and severe water hammer; unilateral wear was only 0.15~0.2 mm, resolving repeated pipe bursts.
— Signed and stamped by the client grinding-leaching plant